 |
 |
The product shown in the photo may differ from the
actual product.
 |
|
Stepping Motor Common Specifications
| Insulation class | Class B(130ºC) |
| Withstand Voltage | AC1500V 50/60Hz for 1minute |
| Insulation resistance | DC500V 100MΩ MIN. |
| Degrees of protection | IP40 |
| Vibration resistance | 15G (Frequency range 10 to 70Hz amplitude 1.52m 70 to 2000 acceleration 15G) Sweep time 15minute / Sweep recurrence rate The x, y and z are each tested 12 times. |
| Impact resistance | 30G(half sine wave with
11 ms duration) The x, y and z are each tested three times for each direction for a total of 18 tests. |
| Ambient temperature | -10 to 40ºC |
| Ambient humidity | 20 to 90%RH (No Condensation) |
PBM503DCC20 Motor specifications
| Motor dimensions | 50mm(1.97inch) sq | |
| Motor length | mm | 102.5 |
| Maximum Stall Torque | N·m | 0.57 |
| oz·in | 80.72 | |
| Rotor inertia | ×10-4kg·m2 | 0.128 |
| ×10-4oz·in2 | 0.70 | |
| Allowable thrust load | N | 14.7 |
| Allowable radial load** | N | 98 |
|
Electromagnetic brake Operation method |
Non-excitation | |
|
Electromagnetic brake Power voltage |
V | DC24V ±5% |
|
Electromagnetic brake Excitation current |
A | 0.27 |
|
Electromagnetic brake Power consumption |
W | 6.5 |
|
Electromagnetic brake Friction torque |
N·m | 0.32 |
| oz·in | 45.31 | |
|
Electromagnetic brake Brake engage time |
ms | 20 |
|
Electromagnetic brake Brake release time |
ms | 35 |
| Mass | kg | 0.83 |
| lbs. | 1.83 | |
** The load point is determined at a position 14mm from the mounting surface.
Motor Dimensions
Motor Characteristics Chart
