Call Us Before You Buy a UPS   

 

1kVA Modular Inverter 


Model: DA10SR

Input:

DC48V

Output:
AC100/110
115/120V

1 - 5kVA
(0.8 -4kW)

           Dimensions
           
The DA10SR is a modular inverter which provides 1kVA true sine wave AC output from a 48VDC source.  Up to five DA10SRs can be "ganged" together to provide up to 5kVA.  For highest reliability, Sanyo Denki recommends an N+1 configuration, where N is the number of DA10 units required to power the load, and one additional DA10 is used for redundancy.   
  • True On Line / Double Conversion
  • True Sine Wave Output
  • 19" Rackmount (requires 2U/kVA +1U for the I/O unit)
  • Switch Selectable AC Voltage - 100, 110, 115, or 120
  • Expandable - add 1kVA units as needed, up to 5kVA
  • Parallel - redundant configurations are possible (N+1)

Rack Mount Inverter System
Shown with five DA10SR units -
for a total of 5kVA output

Beware of "master-slave" schemes with a single point of failure.  The DA10SR system offers true parallel operation.

When you configure a redundant (N+1) system - it can even power the required load in the rare event of a problem with any one of the inverters.  This is true parallel, redundant operation.

Any individual inverter unit can be removed and/or replaced without interrupting the power output of the remaining units. 

A thin (1U) Power Distribution Unit with Display is used for consolidating the power connections and to display the total output current.
Schematic:

 

Dimensions

 

If you would like to place an order or if you have any questions, please contact:

Power Systems Division
Sanyo Denki America, Inc.
468 Amapola Avenue
Torrance, CA  90501
Tel:    (310) 783-5400
Fax:    (310) 782-8021
power@sanyo-denki.com

SANUPS - Protection All The Time!

 

Copyright 2007, SANYO DENKI AMERICA, Inc.